Many times, we are prone to make many mistakes in the process of operating and using the placement machine, which not only reduces our production efficiency, but also affects the subsequent production process. Just in case, here is Everyone showed several common errors, which will cause many errors in the placement machine. We should avoid these failures correctly so that our machines can operate better. Let us take a look.

Wrong operation 1: If we are setting the position of the material, we need to calibrate the position accurately, because the incorrect position is one of the common faults of many machines that have thrown materials and crooked stickers. If there is a problem with the position , We need to make corrections in time, every time before using the placement machine, we need to check it.

Wrong operation 2: We can’t replace the material during the use of the placement machine. This will not only affect the operation of the machine and cause the placement machine to malfunction, but also threaten our lives. If If we urgently want to replace materials, we might as well apply emergency braking to the machine, so as to ensure personal safety.

Misoperation 3: When the placement machine is running, we cannot penetrate the body into the placement machine. If we need to observe the operation, we need to close the safety window, and then observe outside the window. If there is an unexpected situation, we need to check It performs an emergency shutdown.

Misoperation 4: We often like to check the effect in the placement machine. This is a very good operation. However, many defective manufacturers find faulty materials after inspection and perform secondary processing on them. Not only is it a great damage to the material, but it is also a deception of consumers. We refuse to use shoddy products.